HD Series Multi-Directional Motion Mixer
The equipment is designed and manufactured in strict accordance with FDA, GMP and CGMP regulations: triangle swing, pan rotation and rock principle, generate strong alternating pulse motion, excellent mixing effect; Building blocks quick installation structure, modular design, easy to disassemble and clean.
Model | HD-10 | HD-25 | HD-50 | HD-100 | HD-200 | HD-400 | HD-600 | HD-800 | HD-1000 | HD-1200 | HD-1500 |
Barrel Volume (L) |
10 | 25 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1500 |
Max Loading Volume (L) |
7 | 17 | 35 | 70 | 140 | 280 | 420 | 560 | 700 | 840 | 1050 |
Spindle Speed (r/min) |
0-20 | 0-15 | 0-15 | 0-15 | 0-15 | 0-12 | 0-11 | 0-10 | 0-10 | 0-10 | 0-10 |
Motor Power (kw) |
0.55 | 0.75 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 7.5 | 11 | 15 |
Overall Dimension (L×W×H) mm |
640*620*550 | 900*900*75 | 970*950*120 | 1200*1600*1500 | 1400*1800*1600 | 1700*2100*1850 | 2100*2400*2250 | 2200*2500*2300 | 2400*2800*2550 | 2500*3100*2600 | 2800*3600*3200 |
Weight(kg) | 120 | 150 | 300 | 500 | 800 | 1200 | 1200 | 2000 | 2500 | 2800 | 3000 |
This machine is suitable for materials in chemical, pharmaceutical, battery, metal powder, magnetic materials, feed, new materials, phosphors, polishing materials, rare earth materials, plastics, metallurgy, food, and other powder-to-powder mixing and scientific research units. High uniformity mixing.
It has such characteristics as cross and mutually vertical state in space, and mixing drum controlled by Y-type universally-jointer drive and passive shaft. If the drive shaft turns around, the mixing drum will set in rotation, meanwhile setting in multi-directional oscillation at 4 times auto rotation speed. Under the actions of diffusion, flow and shearing due to frequent and rapid rotation, material are mixed together. Besides, the material are mixed under the rotation of the mixing drum without centrifugal force, which brings slow-down in gravity segregation and gives guarantee that mixture can fully meet the requirements on the condition of mixing them for a short time.
The equipment is composed of a base, a transmission system, an electrical control system, a multi-directional motion mechanism, a mixing barrel and other components. The mixing barrel in direct contact with the material is made of high-quality stainless steel. The inner and outer walls of the barrel are polished to meet GMP requirements. .
1. The mixing cylinder moves in multiple directions, and the material has no centrifugal force, no specific gravity segregation, stratification and accumulation.
2. All parts of the cylinder are arc transitions, which are precisely polished.
3. The cantilevered double helical shaft has no bottom bearing, which avoids the failure caused by the powder infiltration of the bottom bearing.
4. The cantilever shaft is cast in one piece without welding, which avoids the phenomenon of broken shaft and improves the safety.
5. The cone of the discharge end of the mixing cylinder is eccentrically designed, and the discharge has no dead angle, no residue, easy to clean, and meets the requirements of GMP.
6.The mixer can start at low speed, run smoothly at the rated speed, and stop at a fixed speed at a reduced speed. The automatic stop position is the best position for feeding and discharging materials.