JFP-110A Series Vertical Capsule Polisher
The Model JFP-110A capsule polisher with the function of sorter as well. It plays the function of not only the polishing for capsule and tablet but eliminating static electricity. It can also automatically reject low weight capsule; loose piece and fragments of capsules. It is suitable for all sizes of capsules without the need to change parts Sorter:
The machine can be connected to the main production line. The capsules can be polished after sorting process which is more suitable for SR capsule dosages.
|
Output |
150,000 pcs/hour |
|
Power |
220V 50 /60HZ，1P，0.18kw |
|
Weight |
60kg |
|
Net Weight |
40kg |
|
Negative Pressure |
2.7m3 /min -0.014Mpa |
|
Compressed Air |
0.25m3 /min 0.3Mpa |
|
Overall Dimension |
800*500*1000mm |
|
Package Dimension |
870*600*720 |
The capsule polishing machine is a special polishing equipment for capsules, which can remove dust on the surface of the capsule and improve the surface finish. It is suitable for the production of various capsules.
It has the characteristics of novel mechanism, simple operation, easy cleaning, high polishing efficiency, and good cleanliness. All parts in contact with medicines are made of stainless steel, and the sanitary conditions of the equipment conform to GMP standards.
The capsule polishing machine can polish capsules and tablets while removing empty shells and broken capsules. This machine is equipped with an all-stainless steel vacuum cleaner, no other vacuum equipment is needed. Adopting negative pressure rejecting device, no pollution to the environment.
The polishing machine is mainly composed of a hopper, a polishing cylinder, a sealing cylinder, a brush, a coupling, a split bearing seat, a motor, a power distribution box, a waste removal head, a discharge hopper, and a frame.
The working principle of this machine is to drive the capsule to move in a circular spiral along the wall of the polishing tube through the rotating movement of the brush, so that the capsule moves along the spiral spring, and the surface of the capsule shell is polished under the constant friction with the brush and the wall of the polishing tube. , The polished capsule enters the waste hopper from the discharge port. In the de-waste device, due to the effect of negative pressure, the light-weight unqualified capsules rise under the action of the airflow and enter the vacuum cleaner through the suction tube. The heavy-weight qualified capsules continue to fall and are discharged through the movable discharge hopper to effectively achieve polishing. To eliminate the purpose. The powder and small fragments that are brushed off during the polishing process enter the sealed cylinder through the small holes on the wall of the polishing cylinder, and are sucked into the vacuum cleaner for recovery.
