CGN208-D Semi-auto Capsule Filling Machine

  • Product Description
  • Technical Parameters


1. Integrating machine, electricity and air, the machine is easy to make separate operation of such actions as capsule feeding, capsule separation, powder filling and capsule locking etc.
2. The auto capsule orientation feeder in same design as fully-auto capsule filler, operated by converter for speed control.
Machine cover, working panel and empty capsule feeder are made of stainless steel, which conforms to sanitary requirements of pharmacy and also avoid the material contamination with copper.
3. The light-touch switches, feeding propeller and filling rotary table can be in automatic run based on preset and frequency speed control.
4. Reducing the packing cost due to high application and run-on.
5. Without traditional gearbox, it is simple in structure and easy to make maintenance.
6. Keeping balance of filling amounts on both sides.
7. Vacuum pump and air compressor are available as standard attachment.

Technical parameters
The time of replacing debugging mold 5-8mins(for beginners)
Production rate 1-2.5 ten thousand/hour(depending on capsules No.)
Applicable capsules 000#,00L#,00#,0#,1#,2#,3#,4#,Mechanism standard capsules
Filling material Without a sticky and wet powder,small granules
Total power 4.0kw
Air pressure 0.03m^3/min 0.6Mpa
Vacuum pump Pump capacity is 40m^3/h
Machine dimension 1140*700*1630mm
Packing dimension 1650*800*1750mm
Net weight 350kg
Gross weight 380kg